Home & Lifestyle

Damaged Wood Floor Refinishing

Damaged wood floors are a common occurrence in the home. With hardwood flooring, any number of stains, spills, or wear and tear can have a negative effect on the finish. Although in most cases it’s due to some type of impact, damaged wood floor refinishing is an option that must be considered. Not only can the refinishing process be costly but it also has the potential for creating an undesired look.

The primary reason behind wood damage is improper care. Whether it’s excessive dirt or water that has been tracked into the wood, the result is an unattractive blemish. Depending on the severity, this might be enough to strip the wood entirely. A thorough wood floor refinishing process will address any of these issues, restoring the wood to its previous beauty. This article will discuss the specifics of this process, as well as how to avoid having to go through this with your wood flooring.

The first step in wood floor refinishing is cleaning. Cleaning the wood will help remove any dirt that was not picked up during mopping, or that was left behind when the floor was cleaned. Using a vacuum with a fine-tipped attachment or a broom with rounded ends, thoroughly clean the floor. Any particles that are missed with the vacuum should be swept up and dusted, or even wiped lightly with a dry cloth.

Once the wood has been cleaned in this manner, it can be sanded slightly to remove rough spots. This process does not require too much pressure on the wood, so it won’t take long. It may be necessary to repeat the sanding process several times, depending on how bad the damage is. Hiring cabinet refinishing company in Houston like Houston Cabinet & Hardwood Restoration is ideal for this step, as they have the power to lock the grain of the wood. After all of the damaged wood floor spots have been sanded, the wood can be given an oil finish to help bring out the natural color of the wood.

For damaged wood floor refinishing that involves staining, a thin coat of furniture polish is applied to the entire floor. If possible, use a product that is recommended by the manufacturer of the wood you are refinishing. Staining is a very tricky process and one that requires practice. Although this type of refinishing is more involved than laminating or sealing the wood, it can be done easily and cost less. However, if you plan to stain the wood yourself, I recommend purchasing a good wood stain that is specifically designed for this purpose.

Once the stained floor has dried, it is ready to install. It is important to make sure that all the door frames, moldings, and other details are nailed correctly. It is also important to double check to make sure that the floor is flat and level before you apply the first layer of wood stain. Although it may sound difficult to do at first, this method can help you save money and time when doing a damaged wood floor refinishing project. If done properly, your damaged wood floor should look beautiful and be the pride of your home.