Home & Lifestyle

Tips for Replacing an Old Bathroom Vanity

Before installing a new bathroom vanity, make sure to measure your space. The length of your wall is usually 16 inches on center, so be sure to measure accordingly. Next, locate the wall studs. You can do this by knocking on the wall and listening for a solid sound. If you cannot locate the studs, use a stud finder. Then, install the vanity using wall anchors that are appropriate for your wall type. Also, be sure to install a drain trap on the sink and supply pipes.

If your vanity is attached to the wall with screws, use a putty knife to cut the caulk around the screws. You will need to remove at least two to four nails or screws. You may also need a crow bar to pry the vanity away from the wall. Once the vanity is off the wall, you can continue to do the rest of the bathroom renovation.

Another tip to choose a new bathroom vanity is to consider the type of countertop. There are many types of countertops to choose from, but the most common types are 30-inch deep, 48-inch deep, and 54-inches deep. Choose a vanity with a depth of 30 inches or more if you’d like to have plenty of storage space. Additionally, you’ll want to consider the height of your sink and faucet, as well as the amount of clearance above the vanity.

If you’d like to have your bathroom vanity look more modern, you can hire a professional from the best home remodeling Sacramento, CA to do it for you. A professional will be able to add new elements, like paint, or a new mirror and decorative pieces. But only if you’re sure the basic frame of your vanity is strong and you’re only changing a few decorative items that have fallen out of style.

Before removing your vanity, make sure to disconnect the water supply lines from the shutoff valves. This prevents sewer gas from entering your house. If you have a mirror that is bonded to the wall, you’ll want to leave it there to avoid breaking it. When removing the old vanity, you must ensure the sink is empty and free of drain traps.

Refinishing your bathroom vanity is a cost-effective alternative to buying a new vanity. However, refinishing can be a time-consuming process and requires patience. Once you’ve completed the sanding step, you can begin painting. You’ll need two coats of paint. You’ll need to allow sufficient drying time between coats of paint.

Another simple way to keep your bathroom vanity clean is to wipe down the surface often. A wipe-down can help prevent the appearance of soap stains, as well as keep it fresh and clean. Wiping down your vanity also helps extend its lifespan.